Fastcom®: 422/4-104-ET Asynchronous Four Port Extended Temperature RS422/485 Interface Adapter   $299.00

Fastcom®: 422/4-104-ET Cable

2x20 header connector to four DB9 receptacles (Included)

The Fastcom: 422/4-104-ET adapter is the fastest and most advanced, four-port RS422 asynchronous adapter in the industry, up to 1.5 Mbps¹. Primarily designed for commercial, industrial, and OEM applications, the Fastcom: 422/4-104-ET features four discrete RS422 channels, complete with RTS and CTS flow control signals. The Fastcom: 422/4-104-ET adapter is designed for industrial applications requiring rugged construction, high reliability and full industrial temperature tolerance (-40 C to +85 C). The Fastcom: 422/4-104-ET is also available in standard temperature, model Fastcom: 422/4-104.

The advanced 16C864 UART on the Fastcom: 422/4-104-ET features full compatibility with standard 16C550 and 16C650 UARTs, but also provides extraordinary 128-byte receive and transmit FIFOs for buffering. This buffering is extremely important when working with RS422 / RS485 communications within high overhead operating systems such as Windows NT and 2000. The extra-deep FIFOs prevent data loss due to overrun and dramatically improve data throughput in all applications. The advanced UART on the Fastcom: 422/4-104-ET is capable of all standard baud rates plus a high-speed mode capable of up to an amazing 1.5 Mbps¹.

The Fastcom: 422/4-104-ET is designed with a compatible mode for operation in Windows 98/2000/NT/XP, and Linux Kernel 2.4.x. The user selectable address and IRQ setting switches allow for "driverless" operation in most operating systems, i.e. uses the system serial port driver for operation. The "shared interrupt" design and user selectable address also allow the installation of multiple Fastcom: 422/4-104-ET cards in the same system.

We recommended that you use our Fastcom: LT1 PC/104 Bus termination adapter with our Fastcom: 422/4-104-ET adapter to improve your system's reliability.

• UART: EXAR 16C864 (Data Sheet)
• BAUD RANGE: Off-the-shelf up to 460.8k. Additional clock rates up to 1.5 Mbps¹ possible
• BUFFERING
  
  • Transmit - 128-bytes
  • Receive - 128-bytes
    
• INTERFACE: RS422 / RS485 DB9 connector
  
  • TX, RX, RTS, CTS
    
• BUS: PC/104

• +5 500mA (typical)

• Storage Temperature Range: -55 to +100 C
• Industrial Operating Temperature Range: -40 to +85 C
• Humidity: 0 to 90% (non-condensing)

• Fastcom: 422/4-104-ET
  
  • Four independent RS422 / RS485 channels
  • Transmit/Receive status LEDs for each channel
  • TX, RX, RTS, CTS signals for each channel
  • Excellent line noise immunity
• Two Address Modes
  
  • WINDOWS Mode:
    
    • Ports are configured as COM1, COM2, COM3, and COM4
      
  • FASTCOM Mode:
    
    • Ports are assigned address and IRQ by the user
• RS485 Mode
  
  • Up to 32 stations on same "twisted-pair" network
  • RTS control of the line driver
    
• High performance 16C864 UART
  
  • Standard on the Fastcom: 422/4-104-ET, no extra charge
  • High throughput, full compatibility, higher speed
    
• Cable, documentation, and software drivers included
• Designed and manufactured by COMMTECH, INC. Wichita, Kansas, USA